2022 Honda Odyssey Owner’s Manual — Brake, Rear Turn Signal Light Bulbs, and Rear Side Marker/Taillights

When replacing, use the following bulbs.

Brake Light: 21 W
Rear Turn Signal Light: 21 W
Rear Side Marker/Taillight: LED

1. Use a Phillips-head screwdriver to remove the bolt.
2. Pull the cover out of the rear pillar.
3. Use a Phillips-head screwdriver to remove the bolts.
4. Pull on the light assembly to rotate about the grommet and remove from the rear pillar.
5. Turn the socket counter-clockwise and remove it. Remove the old bulb.
6. Insert a new bulb and turn the socket clockwise.
7. Slide the light assembly onto the guide on the body.
8. Align the pin with the body grommet, then push in until it fully seats.

Back-Up Light Bulbs/Taillights

---

When replacing, use the following bulbs.

Back-Up Light: 21 W
Taillight: LED

1. Remove the cover by prying on the edge of the cover using a flat-tip screwdriver.
   Wrap the flat-tip screwdriver with a cloth to prevent scratches.
2. Turn the socket counter-clockwise and remove it.
3. Remove the old bulb and insert a new bulb.

Taillights are LED type. Have an authorized Honda dealer inspect and replace the light assembly